Lancia recalls

RecallLancia (Stellantis); alerta notificada en Safety Gate · March 2026 · Ref. F60E / KBA 16288R / SR/00840/26

Lancia Ypsilon IV

48 V starter-generator cap and particulate filter pipe (fire risk)

Ypsilons built between 18 March 2024 and 13 January 2026. Part of a joint Stellantis campaign covering 807,471 vehicles and 14 models; the fix is replacing the cap and checking the 10 mm distance.^[1][2]

See the fault: 48 V starter-generator cap too close to the particulate filter pipe: fire risk

RecallLancia; alerta notificada en Safety Gate/RAPEX · June 2022 · Ref. 6452 / A12/00827/22

Lancia Ypsilon III

Recall of the Ypsilon steering rack rod (March 2022)

174 Ypsilon cars built between 21 and 30 March 2022, because of a steering rack rod locknut that may be badly tightened. Alert A12/00827/22 (RAPEX 23/2022), sent by Germany.^[3][4]

See the fault: Steering rack rod locknut not tightened enough (March 2022 cars)

RecallLancia; alerta notificada en Safety Gate/RAPEX · August 2019 · Ref. 6229 / A12/1190/19

Lancia Ypsilon III

Recall of the Ypsilon front right driveshaft (2018-2019)

Ypsilon type 312 cars built in late 2018 (up to 11 December), because of a possibly faulty front right driveshaft that could break while driving. Alert A12/1190/19, sent by Germany; the sheet does not state the number of cars.^[5][6]

See the fault: Faulty front right driveshaft that could break while driving (late 2018 cars)

RecallLancia; alerta notificada en Safety Gate/RAPEX · August 2018 · Ref. A12/1157/18 (alerta 32/2018)

Lancia Ypsilon III

Recall over badly tightened wheel bolts on the Ypsilon (2017-2018)

Ypsilon type 312 cars built between 22 September 2017 and 28 May 2018, because of wheel bolts without the correct tightening, with a risk of a wheel coming off. Alert sent by Germany; the sheet does not state the number of cars.^[7]

See the fault: Wheel bolts badly tightened at the factory (September 2017 to May 2018 cars)

RecallLancia; alerta notificada en Safety Gate/RAPEX · September 2017 · Ref. A12/1258/17

Lancia Ypsilon III

Recall of the Ypsilon rear right ISOFIX anchorage (2014)

Ypsilon cars built in November 2014, because of an insufficient weld on the rear right ISOFIX anchorage that could come away in an accident. Alert A12/1258/17, sent by Germany; the sheet does not state the number of cars.^[8][9]

See the fault: Rear right ISOFIX child seat anchorage with a poor weld (November 2014 cars)

RecallLancia; alerta notificada en Safety Gate/RAPEX · August 2017 · Ref. A12/1124/17

Lancia Ypsilon III

Recall of the Ypsilon front seat belt pretensioner (2016)

Ypsilon type 312 cars built between September and December 2016, because of a faulty crimping of the gas micro-generator in the front seat belt pretensioner. Alert A12/1124/17, sent by Germany; the sheet does not state the number of cars.^[9][10]

See the fault: Front seat belt pretensioner with badly crimped gas micro-generator (September to December 2016 cars)